Pinion Gear, 48P Ultra-Lightweight Aluminum 28T - R1Wurks

About this part

Light is fast, and the pinion is where you start. Less rotating mass on the motor means faster spin-up, quicker response and better efficiency. These 48P aluminum pinions were built around that idea, with tooth thickness, material removal and clean machining all working to shed weight. FEATURES AND

Specifications

• 7075-T6 aluminum alloy
• Type III hard-coat anodizing for serious wear resistance
• 2.6mm tooth thickness for a good balance of strength and weight
• Precision machined cutouts for reduced mass
• 1/8-inch (3.17mm) center shaft mounting hole
• Includes M3x3mm set screw
• Laser-etched identification and logos

You will receive

• 1 pinion gear in your selected tooth count
• 1 M3x3 set screw
• Weights (including set screw):
• 28T 1.018g | 29T 1.019g | 30T 1.055g | 31T 1.062g
• 32T 1.107g | 33T 1.207g | 34T 1.234g | 35T 1.285g
• Fits Losi 1:10 XXX Buggy, Associated RC-10 B6.0 - 6.3, Losi 1:10 TLR 22-4 2.0, Losi 1:10 XXX-T CR Truck, XRAY XB2 Carpet 2022 (320011) and Losi 1:10 XXT Truck.

Fits