Add-On Lights, 6 LED for RPM Roof Canisters 3mm 14 - RC Lights

About this part

No-solder add-on with six 3mm white LEDs for RPM roof canisters. Brightest LEDs in the industry, easy install, all mounting hardware included, and the body comes off fast. Run it with RCL104 for a 10 LED system, or on any controller with six spare constant channels. Works with RPM roof light bars RPM80922, RPM80923 and RPM80925. Direct fit for Slash 4x4, Slash and SC10. Swap in 5mm or 3mm LEDs for other sizes or colors. Needs an LED controller and power source. Without RCL104, use the Standard 10 LED Controller RCL5051 or any controller with open channels.

You will receive

• Instruction set
• (6) 14" wire extensions RCL539014
• (6) 3mm white LEDs RCL5280W
• (6) 2P connector housings
• (2) zip ties RCL5080

Specifications

• Total LED current draw (@6V): 110mA (a standard servo draws about 350mA)
• Blue, green, white, white strobe, red strobe LEDs: 3.2V max forward voltage, 30mA max current
• Amber, red LEDs: 1.9V max forward voltage, 30mA max current
• FITS:
• Tamiya 1:18 TLT-1 Rockbuster
• Tamiya Hi-Lift: F350 Tundra HiLux
• HPI Electric Wheely King 1/12
• Axial AX-10 Scorpion Crawler
• Tamiya CR-01 Crawler FJ40
• Kyosho Rock Force

Fits