Hardware Kit, Steel 100 Piece for Axial SCX30 - Hot Racing

About this part

A 100-piece hardware kit for the stock Axial SCX30 from Hot Racing. Steel screws and nuts, sorted so you have the right fastener for every spot on the rig.

Features

• Steel screws and nuts

You will receive

• 100 pieces total:
• RH M1.4 x 5mm hex stainless, five (5)
• RH M1.4 x 8mm hex stainless, eight (8)
• RH M1.4 x 12mm hex stainless, six (6)
• RH M1 x 4mm Phillips black oxide, twenty-eight (28)
• RH M1 x 6mm Phillips black oxide, twenty-nine (29)
• RH M1 x 8mm Phillips black oxide, sixteen (16)
• FH M2 x 5mm hex black oxide, four (4)
• LN M2 lock nut stainless steel, four (4)

Requirements

• Round head M1.4 screws take a 1.27mm (0.05 inch) hex wrench
• Round head Phillips M1 screws use a PH00 Phillips driver
• M2 motor screws take a 1.5mm hex wrench
• M2 lock nuts take a 4mm driver

Fits