Dual Spring Set, Factory Spec for Yeti Xl - Hot Racing

About this part

Hot Racing factory spec dual spring set for dual spring coilover shocks on the 1/8 Axial Yeti XL. Two springs per shock work together, a tender spring for small bumps and a main spring for big landings, and you get nine combinations to play with.

Features

• The tender spring gives a soft response at the start of the stroke for small bumps
• The main spring adds stiffness at larger compression for big jumps
• Together they keep the tires on the ground over uneven terrain and offer tuning to reduce body roll in corners and squat and dive under acceleration and braking
• Steel construction, with three colors marking stiffness
• Nine spring combinations
• INCLUDED:
• Two (2) soft tender springs (blue)
• Two (2) medium tender springs (chrome)
• Two (2) hard tender springs (red)
• Two (2) soft main springs (blue)
• Two (2) medium main springs (red)
• Two (2) hard main springs (chrome)
• Four (4) machined Delrin spring collars

Requirements

• Installation

Specifications

• Tender springs: 40mm long, 23mm ID
• Blue: 10 coil, 1.4mm wire, 1.7 lb/in
• Chrome: 8 coil, 1.7mm wire, 5.2 lb/in
• Red: 11 coil, 2.0mm wire, 7.6 lb/in
• Main springs: 70mm long, 23mm ID
• Blue: 14 coil, 1.5mm wire, 1

Fits